Category: Technical Documents
Date: 2024-03-21
Click: 725
Author: JZ
Collection:
1： Homogeneous emulsifier is an equipment used in industry and laboratories, and common problems include the following:
-Difficulty or inability to start the machine: Possible causes of faults include power failure, motor damage, circuit failure, etc.
-Abnormal sound occurs during machine operation: The possible cause of the malfunction is bearing damage, loose transmission belt, gear wear, etc.
-Excessive temperature during machine operation: Possible causes of malfunction include cooling system malfunction, insufficient lubricating oil, etc.
-Poor emulsification effect: The possible causes of the malfunction are impeller damage, inappropriate speed, and unreasonable material liquid ratio.
Corresponding solutions can be taken to address the above issues. If encountering unresolved issues, it is recommended to contact the device manufacturer for technical support. Jinzong Enterprise has been focusing on the research, development, design, and manufacturing of emulsifying machines for over 20 years. Welcome to inquire and visit the factory for guidance.
2： The capacity of a homogenizing emulsifier is usually between 50L and 1000L, depending on the equipment model and specifications.
When selecting a homogeneous emulsifier, it is necessary to determine the appropriate capacity based on actual production needs.
If you need to handle a large amount of materials, you can choose high-capacity equipment; If the production scale is small, small capacity equipment can be chosen.
At the same time, it is necessary to consider factors such as equipment performance, stability, and safety to ensure that the equipment can meet production requirements.
3： When cleaning the homogenizing emulsifier, first cut off the power supply of the equipment and remove any residue on the equipment,
Wipe the surface of the equipment with a cloth dipped in drinking water until clean, then rinse the surface of the equipment again with a silk towel dipped in purified water.
After cleaning the tank with drinking water, rinse it again with purified water.
In addition, the emulsification head of the homogenizing emulsifier cannot operate when the emulsification tank is empty due to its high speed, in order to avoid local heating that may affect the sealing degree.
4： When using a homogenizing emulsifier, the following precautions should be taken:
-Cleaning: After use, clean the inside of the equipment in a timely manner to avoid corrosion or blockage caused by residues. When cleaning, be careful not to use metal brushes or sharp objects to clean the inside of the equipment to avoid scratching the surface of the machine.
-Check lubricating oil: Check the quantity and quality of lubricating oil once a week. If any abnormalities are found, replace the lubricating oil in a timely manner to avoid equipment failures caused by insufficient lubrication.
-Maintenance of sealing rings: Regularly inspect and replace the sealing rings inside the homogenizing emulsifier. If aging or wear is found on the sealing rings, they should be replaced in a timely manner.
-Cleaning the filter screen: Regularly clean the filter screen inside the equipment to prevent impurities from blocking the filter and affecting the homogeneous emulsification effect. It is recommended to clean the filter once a week.
-Check the motor: Regularly check whether the motor is running normally, such as whether there is any noise, heat, etc. If any abnormalities are found, they should be repaired or replaced in a timely manner.
-Prevention of static electricity: Within the homogenizing emulsifier, static electricity may be generated due to the flow and friction of liquid and semi-solid materials. To avoid the impact of static electricity on the equipment, conductive media that meets the requirements should be used, and the surface of the equipment should be kept dry and clean.
-Attention to safety operation: When using a homogenizing emulsifier, it is necessary to follow the relevant safety operating procedures, wear safety equipment, and ensure personal safety.
